# Epilogue

“Begin at the beginning”, the King said, very gravely, “and go on till you come to the end: then stop”

– Lewis Carroll

It feels somewhat strange to be writing this chapter, and more than a little inappropriate. An epilogue is what you write when a book is finished, and this book really isn’t finished. There are a ** lot** of things still missing from this book. It doesn’t have an index yet. A lot of references are missing. There are no “do it yourself exercises”. And in general, I feel that there a lot of things that are wrong with the presentation, organisation and content of this book. Given all that, I don’t want to try to write a “proper” epilogue. I haven’t finished writing the substantive content yet, so it doesn’t make sense to try to bring it all together. But this version of the book is going to go online for students to use, and you will be able to purchase a hard copy too, so I want to give it at least a veneer of closure. So let’s give it a go, shall we?

## The undiscovered statistics

First, I’m going to talk a bit about some of the content that I wish I’d had the chance to cram into this version of the book, just so that you can get a sense of what other ideas are out there in the world of statistics. I think this would be important even if this book were getting close to a final product: one thing that students often fail to realise is that their introductory statistics classes are just that: an introduction. If you want to go out into the wider world and do real data analysis, you have to learn a whole lot of new tools that extend the content of your undergraduate lectures in all sorts of different ways. Don’t assume that something can’t be done just because it wasn’t covered in undergrad. Don’t assume that something is the right thing to do just because it {} covered in an undergrad class. To stop you from falling victim to that trap, I think it’s useful to give a bit of an overview of some of the other ideas out there.

### Omissions within the topics covered

Even within the topics that I have covered in the book, there are a lot of omissions that I’d like to redress in future version of the book. Just sticking to things that are purely about statistics (rather than things associated with R), the following is a representative but not exhaustive list of topics that I’d like to expand on in later versions:

**Other types of correlations**In Chapter 5 I talked about two types of correlation: Pearson and Spearman. Both of these methods of assessing correlation are applicable to the case where you have two continuous variables and want to assess the relationship between them. What about the case where your variables are both nominal scale? Or when one is nominal scale and the other is continuous? There are actually methods for computing correlations in such cases (e.g., polychoric correlation), but I just haven’t had time to write about them yet.**More detail on effect sizes**In general, I think the treatment of effect sizes throughout the book is a little more cursory than it should be. In almost every instance, I’ve tended just to pick one measure of effect size (usually the most popular one) and describe that. However, for almost all tests and models there are multiple ways of thinking about effect size, and I’d like to go into more detail in the future.**Dealing with violated assumptions**In a number of places in the book I’ve talked about some things you can do when you find that the assumptions of your test (or model) are violated, but I think that I ought to say more about this. In particular, I think it would have been nice to talk in a lot more detail about how you can tranform variables to fix problems. I talked a bit about this in Sections 7.2, 7.3 and 15.9.4, but the discussion isn’t detailed enough I think.**Interaction terms for regression**In Chapter 16 I talked about the fact that you can have interaction terms in an ANOVA, and I also pointed out that ANOVA can be interpreted as a kind of linear regression model. Yet, when talking about regression in Chapter 15 I made no mention of interactions at all. However, there’s nothing stopping you from including interaction terms in a regression model. It’s just a little more complicated to figure out what an “interaction” actually means when you’re talking about the interaction between two continuous predictors, and it can be done in more than one way. Even so, I would have liked to talk a little about this.**Method of planned comparison**As I mentioned this in Chapter 16, it’s not always appropriate to be using post hoc correction like Tukey’s HSD when doing an ANOVA, especially when you had a very clear (and limited) set of comparisons that you cared about ahead of time. I would like to talk more about this in a future version of book.**Multiple comparison methods**Even within the context of talking about post hoc tests and multiple comparisons, I would have liked to talk about the methods in more detail, and talk about what other methods exist besides the few options I mentioned.

## Statistical models missing from the book

Statistics is a huge field. The core tools that I’ve described in this book (chi-square tests, \(t\)-tests, ANOVA and regression) are basic tools that are widely used in everyday data analysis, and they form the core of most introductory stats books. However, there are a ** lot** of other tools out there. There are so very many data analysis situations that these tools don’t cover, and in future versions of this book I want to talk about them. To give you a sense of just how much more there is, and how much more work I want to do to finish this thing, the following is a list of statistical modelling tools that I would have liked to talk about. Some of these will definitely make it into future versions of the book.

Analysis of covariance In Chapter 16 I spent a bit of time discussing the connection between ANOVA and regression, pointing out that any ANOVA model can be recast as a kind of regression model. More generally, both are examples of

*linear models*, and it’s quite possible to consider linear models that are more general than either. The classic example of this is “analysis of covariance” (ANCOVA), and it refers to the situation where some of your predictors are continuous (like in a regression model) and others are categorical (like in an ANOVA).**Nonlinear regression**When discussing regression in Chapter 15, we saw that regression assume that the relationship between predictors and outcomes is linear. One the other hand, when we talked about the simpler problem of correlation in Chapter 5, we saw that there exist tools (e.g., Spearman correlations) that are able to assess non-linear relationships between variables. There are a number of tools in statistics that can be used to do non-linear regression. For instance, some non-linear regression models assume that the relationship between predictors and outcomes is monotonic (e.g., isotonic regression), while others assume that it is smooth but not necessarily monotonic (e.g., Lowess regression), while others assume that the relationship is of a known form that happens to be nonlinear (e.g., polynomial regression).**Logistic regression**Yet another variation on regression occurs when the outcome variable is binary valued, but the predictors are continuous. For instance, suppose you’re investigating social media, and you want to know if it’s possible to predict whether or not someone is on Twitter as a function of their income, their age, and a range of other variables. This is basically a regression model, but you can’t use regular linear regression because the outcome variable is binary (you’re either on Twitter or you’re not): because the outcome variable is binary, there’s no way that the residuals could possibly be normally distributed. There are a number of tools that statisticians can apply to this situation, the most prominent of which is logistic regression.**The General Linear Model (GLM)**The GLM is actually a family of models that includes logistic regression, linear regression, (some) nonlinear regression, ANOVA and many others. The basic idea in the GLM is essentially the same idea that underpins linear models, but it allows for the idea that your data might not be normally distributed, and allows for nonlinear relationships between predictors and outcomes. There are a lot of very handy analyses that you can run that fall within the GLM, so it’s a very useful thing to know about.**Survival analysis**In Chapter 2 I talked about “differential attrition”, the tendency for people to leave the study in a non-random fashion. Back then, I was talking about it as a potential methodological concern, but there are a lot of situations in which differential attrition is actually the thing you’re interested in. Suppose, for instance, you’re interested in finding out how long people play different kinds of computer games in a single session. Do people tend to play RTS (real time strategy) games for longer stretches than FPS (first person shooter) games? You might design your study like this. People come into the lab, and they can play for as long or as little as they like. Once they’re finished, you record the time they spent playing. However, due to ethical restrictions, let’s suppose that you cannot allow them to keep playing longer than two hours. A lot of people will stop playing before the two hour limit, so you know exactly how long they played. But some people will run into the two hour limit, and so you don’t know how long they would have kept playing if you’d been able to continue the study. As a consequence, your data are systematically*censored*: you’re missing all of the very long times. How do you analyse this data sensibly? This is the problem that survival analysis solves. It is specifically designed to handle this situation, where you’re systematically missing one “side” of the data because the study ended. It’s very widely used in health research, and in that context it is often literally used to analyse survival. For instance, you may be tracking people with a particular type of cancer, some who have received treatment A and others who have received treatment B, but you only have funding to track them for 5 years. At the end of the study period some people are alive, others are not. In this context, survival analysis is useful for determining which treatment is more effective, and telling you about the risk of death that people face over time.**Repeated measures ANOVA**When talking about reshaping data in Chapter 7, I introduced some data sets in which each participant was measured in multiple conditions (e.g., in the drugs data set, the working memory capacity (WMC) of each person was measured under the influence of alcohol and caffeine). It is quite common to design studies that have this kind of repeated measures structure. A regular ANOVA doesn’t make sense for these studies, because the repeated measurements mean that independence is violated (i.e., observations from the same participant are more closely related to one another than to observations from other participants. Repeated measures ANOVA is a tool that can be applied to data that have this structure. The basic idea behind RM-ANOVA is to take into account the fact that participants can have different overall levels of performance. For instance, Amy might have a WMC of 7 normally, which falls to 5 under the influence of caffeine, whereas Borat might have a WMC of 6 normally, which falls to 4 under the influence of caffeine. Because this is a repeated measures design, we recognise that – although Amy has a higher WMC than Borat – the effect of caffeine is identical for these two people. In other words, a repeated measures design means that we can attribute some of the variation in our WMC measurement to individual differences (i.e., some of it is just that Amy has higher WMC than Borat), which allows us to draw stronger conclusions about the effect of caffeine.**Mixed models**Repeated measures ANOVA is used in situations where you have observations clustered within experimental units. In the example I gave above, we have multiple WMC measures for each participant (i.e., one for each condition). However, there are a lot of other ways in which you can end up with multiple observations per participant, and for most of those situations the repeated measures ANOVA framework is insufficient. A good example of this is when you track individual people across multiple time points. Let’s say you’re tracking happiness over time, for two people. Aaron’s happiness starts at 10, then drops to 8, and then to 6. Belinda’s happiness starts at 6, then rises to 8 and then to 10. Both of these two people have the same “overall” level of happiness (the average across the three time points is 8), so a repeated measures ANOVA analysis would treat Aaron and Belinda the same way. But that’s clearly wrong. Aaron’s happiness is decreasing, whereas Belinda’s is increasing. If you want to optimally analyse data from an experiment where people can change over time, then you need a more powerful tool than repeated measures ANOVA. The tools that people use to solve this problem are called “mixed” models, because they are designed to learn about individual experimental units (e.g. happiness of individual people over time) as well as overall effects (e.g. the effect of money on happiness over time). Repeated measures ANOVA is perhaps the simplest example of a mixed model, but there’s a lot you can do with mixed models that you can’t do with repeated measures ANOVA.**Reliability analysis**Back in Chapter 2 I talked about reliability as one of the desirable characteristics of a measurement. One of the different types of reliability I mentioned was inter-item reliability. For example, when designing a survey used to measure some aspect to someone’s personality (e.g., extraversion), one generally attempts to include several different questions that all ask the same basic question in lots of different ways. When you do this, you tend to expect that all of these questions will tend to be correlated with one another, because they’re all measuring the same latent construct. There are a number of tools (e.g., Cronbach’s \(\alpha\)) that you can use to check whether this is actually true for your study.**Factor analysis**One big shortcoming with reliability measures like Cronbach’s \(\alpha\) is that they assume that your observed variables are all measuring a*single*latent construct. But that’s not true in general. If you look at most personality questionnaires, or IQ tests, or almost anything where you’re taking lots of measurements, it’s probably the case that you’re actually measuring several things at once. For example, all the different tests used when measuring IQ do tend to correlate with one another, but the pattern of correlations that you see across tests suggests that there are multiple different “things” going on in the data. Factor analysis (and related tools like principal components analysis and independent components analsysis) is a tool that you can use to help you figure out what these things are. Broadly speaking, what you do with these tools is take a big correlation matrix that describes all pairwise correlations between your variables, and attempt to express this pattern of correlations using only a small number of latent variables. Factor analysis is a very useful tool – it’s a great way of trying to see how your variables are related to one another – but it can be tricky to use well. A lot of people make the mistake of thinking that when factor analysis uncovers a latent variable (e.g., extraversion pops out as a latent variable when you factor analyse most personality questionnaires), it must actually correspond to a real “thing”. That’s not necessarily true. Even so, factor analysis is a very useful thing to know about (especially for psychologists), and I do want to talk about it in a later version of the book.**Multidimensional scaling**Factor analysis is an example of an “unsupervised learning” model. What this means is that, unlike most of the “supervised learning” tools I’ve mentioned, you can’t divide up your variables in to predictors and outcomes. Regression is supervised learning; factor analysis is unsupervised learning. It’s not the only type of unsupervised learning model however. For example, in factor analysis one is concerned with the analysis of correlations between variables. However, there are many situations where you’re actually interested in analysing similarities or dissimilarities between objects, items or people. There are a number of tools that you can use in this situation, the best known of which is multidimensional scaling (MDS). In MDS, the idea is to find a “geometric” representation of your items. Each item is “plotted” as a point in some space, and the distance between two points is a measure of how dissimilar those items are.**Clustering**Another example of an unsupervised learning model is clustering (also referred to as classification), in which you want to organise all of your items into meaningful groups, such that similar items are assigned to the same groups. A lot of clustering is unsupervised, meaning that you don’t know anything about what the groups are, you just have to guess. There are other “supervised clustering” situations where you need to predict group memberships on the basis of other variables, and those group memberships are actually observables: logistic regression is a good example of a tool that works this way. However, when you don’t actually know the group memberships, you have to use different tools (e.g., \(k\)-means clustering). There’s even situations where you want to do something called “semi-supervised clustering”, in which you know the group memberships for some items but not others. As you can probably guess, clustering is a pretty big topic, and a pretty useful thing to know about.**Causal models**One thing that I haven’t talked about much in this book is how you can use statistical modeling to learn about the causal relationships between variables. For instance, consider the following three variables which might be of interest when thinking about how someone died in a firing squad. We might want to measure whether or not an execution order was given (variable A), whether or not a marksman fired their gun (variable B), and whether or not the person got hit with a bullet (variable C). These three variables are all correlated with one another (e.g., there is a correlation between guns being fired and people getting hit with bullets), but we actually want to make stronger statements about them than merely talking about correlations. We want to talk about causation. We want to be able to say that the execution order (A) causes the marksman to fire (B) which causes someone to get shot (C). We can express this by a directed arrow notation: we write it as \(A \rightarrow B \rightarrow C\). This “causal chain” is a fundamentally different explanation for events than one in which the marksman fires first, which causes the shooting \(B \rightarrow C\), and then causes the executioner to “retroactively” issue the execution order, \(B \rightarrow A\). This “common effect” model says that A and C are both caused by B. You can see why these are different. In the first causal model, if we had managed to stop the executioner from issuing the order (intervening to change A), then no shooting would have happened. In the second model, the shooting would have happened any way because the marksman was*not*following the execution order. There is a big literature in statistics on trying to understand the causal relationships between variables, and a number of different tools exist to help you test different causal stories about your data. The most widely used of these tools (in psychology at least) is structural equations modelling (SEM), and at some point I’d like to extend the book to talk about it.

Of course, even this listing is incomplete. I haven’t mentioned time series analysis, item response theory, market basket analysis, classification and regression trees, or any of a huge range of other topics. However, the list that I’ve given above is essentially my wish list for this book. Sure, it would double the length of the book, but it would mean that the scope has become broad enough to cover most things that applied researchers in psychology would need to use.

## Other ways of doing inference

A different sense in which this book is incomplete is that it focuses pretty heavily on a very narrow and old-fashioned view of how inferential statistics should be done. In Chapter 10 I talked a little bit about the idea of unbiased estimators, sampling distributions and so on. In Chapter 11 I talked about the theory of null hypothesis significance testing and \(p\)-values. These ideas have been around since the early 20th century, and the tools that I’ve talked about in the book rely very heavily on the theoretical ideas from that time. I’ve felt obligated to stick to those topics because the vast majority of data analysis in science is also reliant on those ideas. However, the theory of statistics is not restricted to those topics, and – while everyone should know about them because of their practical importance – in many respects those ideas do not represent best practice for contemporary data analysis. One of the things that I’m especially happy with is that I’ve been able to go a little beyond this. Chapter 17 now presents the Bayesian perspective in a reasonable amount of detail, but the book overall is still pretty heavily weighted towards the frequentist orthodoxy. Additionally, there are a number of other approaches to inference that are worth mentioning:

**Bootstrapping**Throughout the book, whenever I’ve introduced a hypothesis test, I’ve had a strong tendency just to make assertions like “the sampling distribution for BLAH is a \(t\)-distribution” or something like that. In some cases, I’ve actually attempted to justify this assertion. For example, when talking about \(\chi^2\) tests in Chapter 12, I made reference to the known relationship between normal distributions and \(\chi^2\) distributions (see Chapter 9) to explain how we end up assuming that the sampling distribution of the goodness of fit statistic is \(\chi^2\). However, it’s also the case that a lot of these sampling distributions are, well, wrong. The \(\chi^2\) test is a good example: it is based on an assumption about the distribution of your data, an assumption which is known to be wrong for small sample sizes! Back in the early 20th century, there wasn’t much you could do about this situation: statisticians had developed mathematical results that said that “under assumptions BLAH about the data, the sampling distribution is approximately BLAH”, and that was about the best you could do. A lot of times they didn’t even have that: there are lots of data analysis situations for which no-one has found a mathematical solution for the sampling distributions that you need. And so up until the late 20th century, the corresponding tests didn’t exist or didn’t work. However, computers have changed all that now. There are lots of fancy tricks, and some not-so-fancy, that you can use to get around it. The simplest of these is bootstrapping, and in it’s simplest form it’s incredibly simple. Here it is: simulate the results of your experiment lots and lots of time, under the twin assumptions that (a) the null hypothesis is true and (b) the unknown population distribution actually looks pretty similar to your raw data. In other words, instead of assuming that the data are (for instance) normally distributed, just assume that the population looks the same as your sample, and then use computers to simulate the sampling distribution for your test statistic if that assumption holds. Despite relying on a somewhat dubious assumption (i.e., the population distribution is the same as the sample!) bootstrapping is quick and easy method that works remarkably well in practice for lots of data analysis problems.**Cross validation**One question that pops up in my stats classes every now and then, usually by a student trying to be provocative, is “Why do we care about inferential statistics at all? Why not just describe your sample?” The answer to the question is usually something like this: “Because our true interest as scientists is not the specific sample that we have observed in the, we want to make predictions about data we might observe in the*past*”. A lot of the issues in statistical inference arise because of the fact that we always expect the future to be similar to but a bit different from the past. Or, more generally, new data won’t be quite the same as old data. What we do, in a lot of situations, is try to derive mathematical rules that help us to draw the inferences that are most likely to be correct for new data, rather than to pick the statements that best describe old data. For instance, given two models A and B, and a data set X you collected today, try to pick the model that will best describe a new data set Y that you’re going to collect tomorrow. Sometimes it’s convenient to simulate the process, and that’s what cross-validation does. What you do is divide your data set into two subsets, X1 and X2. Use the subset X1 to train the model (e.g., estimate regression coefficients, let’s say), but then assess the model performance on the other one X2. This gives you a measure of how well the model*future**generalises*from an old data set to a new one, and is often a better measure of how good your model is than if you just fit it to the full data set X.**Robust statistics**Life is messy, and nothing really works the way it’s supposed to. This is just as true for statistics as it is for anything else, and when trying to analyse data we’re often stuck with all sorts of problems in which the data are just messier than they’re supposed to be. Variables that are supposed to be normally distributed are not*actually*normally distributed, relationships that are supposed to be linear are not*actually*linear, and some of the observations in your data set are almost certainly junk (i.e., not measuring what they’re supposed to). All of this messiness is ignored in most of the statistical theory I developed in this book. However, ignoring a problem doesn’t always solve it. Sometimes, it’s actually okay to ignore the mess, because some types of statistical tools are “robust”: if the data don’t satisfy your theoretical assumptions, they still work pretty well. Other types of statistical tools are not robust: even minor deviations from the theoretical assumptions cause them to break. Robust statistics is a branch of stats concerned with this question, and they talk about things like the “breakdown point” of a statistic: that is, how messy does your data have to be before the statistic cannot be trusted? I touched on this in places. The mean is*not*a robust estimator of the central tendency of a variable; the median is. For instance, suppose I told you that the ages of my five best friends are 34, 39, 31, 43 and 4003 years. How old do you think they are on average? That is, what is the true population mean here? If you use the sample mean as your estimator of the population mean, you get an answer of 830 years. If you use the sample median as the estimator of the population mean, you get an answer of 39 years. Notice that, even though you’re “technically” doing the wrong thing in the second case (using the median to estimate the mean!) you’re actually getting a better answer. The problem here is that one of the observations is clearly, obviously a lie. I don’t have a friend aged 4003 years. It’s probably a typo: I probably meant to type 43. But what if I had typed 53 instead of 43, or 34 instead of 43? Could you be sure if this was a typo? Sometimes the errors in the data are subtle, so you can’t detect them just by eyeballing the sample, but they’re still errors that contaminate your data, and they still affect your conclusions. Robust statistics is a concerned with how you can make*safe*inferences even when faced with contamination that you don’t know about. It’s pretty cool stuff.

### Miscellaneous topics

**Missing data**Suppose you’re doing a survey, and you’re interested in exercise and weight. You send data to four people. Adam says he exercises a lot and is not overweight. Briony says she exercises a lot and is not overweight. Carol says she does not exercise and is overweight. Dan says he does not exercise and refuses to answer the question about his weight. Elaine does not return the survey. You now have a missing data problem. There is one entire survey missing, and one question missing from another one, What do you do about it? I’ve only barely touched on this question in this book, in Section5.8, and in that section all I did was tell you about some R commands you can use to ignore the missing data. But ignoring missing data is not, in general, a safe thing to do. Let’s think about Dan’s survey here. Firstly, notice that, on the basis of my other responses, I appear to be more similar to Carol (neither of us exercise) than to Adam or Briony. So if you were forced to guess my weight, you’d guess that I’m closer to her than to them. Maybe you’d make some correction for the fact that Adam and I are males and Briony and Carol are females. The statistical name for this kind of guessing is “imputation”. Doing imputation safely is hard, but important, especially when the missing data are missing in a systematic way. Because of the fact that people who are overweight are often pressured to feel poorly about their weight (often thanks to public health campaigns), we actually have reason to suspect that the people who are not responding are more likely to be overweight than the people who do respond. Imputing a weight to Dan means that the number of overweight people in the sample will probably rise from 1 out of 3 (if we ignore Dan), to 2 out of 4 (if we impute Dan’s weight). Clearly this matters. But doing it sensibly is more complicated than it sounds. Earlier, I suggested you should treat me like Carol, since we gave the same answer to the exercise question. But that’s not quite right: there is a systematic difference between us. She answered the question, and I didn’t. Given the social pressures faced by overweight people, isn’t it likely that I’m*more*overweight than Carol? And of course this is still ignoring the fact that it’s not sensible to impute a*single*weight to me, as if you actually knew my weight. Instead, what you need to do it is impute a range of plausible guesses (referred to as multiple imputation), in order to capture the fact that you’re more uncertain about my weight than you are about Carol’s. And let’s not get started on the problem posed by the fact that Elaine didn’t send in the survey. As you can probably guess, dealing with missing data is an increasingly important topic. In fact, I’ve been told that a lot of journals in some fields will not accept studies that have missing data unless some kind of sensible multiple imputation scheme is followed.**Power analysis**In Chapter 11 I discussed the concept of power (i.e., how likely are you to be able to detect an effect if it actually exists), and referred to power analysis, a collection of tools that are useful for assessing how much power your study has. Power analysis can be useful for planning a study (e.g., figuring out how large a sample you’re likely to need), but it also serves a useful role in analysing data that you already collected. For instance, suppose you get a significant result, and you have an estimate of your effect size. You can use this information to estimate how much power your study actually had. This is kind of useful, especially if your effect size is not large. For instance, suppose you reject the null hypothesis \(p<.05\), but you use power analysis to figure out that your estimated power was only \(.08\). The significant result means that, if the null hypothesis was in fact true, there was a 5% chance of getting data like this. But the low power means that, even if the null hypothesis is false, the effect size was really as small as it looks, there was only an 8% chance of getting data like the one you did. This suggests that you need to be pretty cautious, because luck seems to have played a big part in your results, one way or the other!**Data analysis using theory-inspired models**In a few places in this book I’ve mentioned response time (RT) data, where you record how long it takes someone to do something (e.g., make a simple decision). I’ve mentioned that RT data are almost invariably non-normal, and positively skewed. Additionally, there’s a thing known as the speed-accuracy tradeoff: if you try to make decisions too quickly (low RT), you’re likely to make poorer decisions (lower accuracy). So if you measure both the accuracy of a participant’s decisions and their RT, you’ll probably find that speed and accuracy are related. There’s more to the story than this, of course, because some people make better decisions than others regardless of how fast they’re going. Moreover, speed depends on both cognitive processes (i.e., time spend thinking) but also physiological ones (e.g., how fast can you move your muscles). It’s starting to sound like analysing this data will be a complicated process. And indeed it is, but one of the things that you find when you dig into the psychological literature is that there already exist mathematical models (called “sequential sampling models”) that describe how people make simple decisions, and these models take into account a lot of the factors I mentioned above. You won’t find any of these theoretically-inspired models in a standard statistics textbook. Standard stats textbooks describe standard tools, tools that could meaningfully be applied in lots of different disciplines, not just psychology. ANOVA is an example of a standard tool: it is just as applicable to psychology as to pharmacology. Sequential sampling models are not: they are psychology-specific, more or less. This doesn’t make them less powerful tools: in fact, if you’re analysing data where people have to make choices quickly, you should really be using sequential sampling models to analyse the data. Using ANOVA or regression or whatever won’t work as well, because the theoretical assumptions that underpin them are not well-matched to your data. In contrast, sequential sampling models were explicitly designed to analyse this specific type of data, and their theoretical assumptions are*extremely*well-matched to the data. Obviously, it’s impossible to cover this sort of thing properly, because there are thousands of context-specific models in every field of science. Even so, one thing that I’d like to do in later versions of the book is to give some case studies that are of particular relevance to psychologists, just to give a sense for how psychological theory can be used to do better statistical analysis of psychological data. So, in later versions of the book I’ll probably talk about how to analyse response time data, among other things.

## Learning the basics, and learning them in R

Okay, that was… long. And even that listing is massively incomplete. There really are a *lot* of big ideas in statistics that I haven’t covered in this book. It can seem pretty depressing to finish a 600-page textbook only to be told that this only the beginning, especially when you start to suspect that half of the stuff you’ve been taught is wrong. For instance, there are a lot of people in the field who would strongly argue against the use of the classical ANOVA model, yet I’ve devote two whole chapters to it! Standard ANOVA can be attacked from a Bayesian perspective, or from a robust statistics perspective, or even from a “it’s just plain wrong” perspective (people very frequently use ANOVA when they should actually be using mixed models). So why learn it at all?

As I see it, there are two key arguments. Firstly, there’s the pure pragmatism argument. Rightly or wrongly, ANOVA is widely used. If you want to understand the scientific literature, you need to understand ANOVA. And secondly, there’s the “incremental knowledge” argument. In the same way that it was handy to have seen one-way ANOVA before trying to learn factorial ANOVA, understanding ANOVA is helpful for understanding more advanced tools, because a lot of those tools extend on or modify the basic ANOVA setup in some way. For instance, although mixed models are way more useful than ANOVA and regression, I’ve never heard of anyone learning how mixed models work without first having worked through ANOVA and regression. You have to learn to crawl before you can climb a mountain.

Actually, I want to push this point a bit further. One thing that I’ve done a lot of in this book is talk about fundamentals. I spent a lot of time on probability theory. I talked about the theory of estimation and hypothesis tests in more detail than I needed to. When talking about R, I spent a lot of time talking about how the language works, and talking about things like writing your own scripts, functions and programs. I didn’t just teach you how to draw a histogram using `hist()`

, I tried to give a basic overview of how the graphics system works. Why did I do all this? Looking back, you might ask whether I really *needed* to spend all that time talking about what a probability distribution is, or why there was even a section on probability density. If the goal of the book was to teach you how to run a \(t\)-test or an ANOVA, was all that really necessary? Or, come to think of it, why bother with R at all? There are lots of free alternatives out there: PSPP, for instance, is an SPSS-like clone that is totally free, has simple “point and click” menus, and can (I think) do every single analysis that I’ve talked about in this book. And you can learn PSPP in about 5 minutes. Was this all just a huge waste of everyone’s time???

The answer, I hope you’ll agree, is no. The goal of an introductory stats is *not* to teach ANOVA. It’s not to teach \(t\)-tests, or regressions, or histograms, or \(p\)-values. The goal is to start you on the path towards becoming a skilled data analyst. And in order for you to become a skilled data analyst, you need to be able to do more than ANOVA, more than \(t\)-tests, regressions and histograms. You need to be able to *think properly* about data. You need to be able to learn the more advanced statistical models that I talked about in the last section, and to understand the theory upon which they are based. And you need to have access to software that will let you use those advanced tools. And this is where – in my opinion at least – all that extra time I’ve spent on the fundamentals pays off. If you understand the graphics system in R, then you can draw the plots that *you* want, not just the canned plots that someone else has built into R for you. If you understand probability theory, you’ll find it much easier to switch from frequentist analyses to Bayesian ones. If you understand the core mechanics of R, you’ll find it much easier to generalise from linear regressions using `lm()`

to using generalised linear models with `glm()`

or linear mixed effects models using `lme()`

and `lmer()`

. You’ll even find that a basic knowledge of R will go a long way towards teaching you how to use other statistical programming languages that are based on it. Bayesians frequently rely on tools like WinBUGS and JAGS, which have a number of similarities to R, and can in fact be called from within R. In fact, because R is the “lingua franca of statistics”, what you’ll find is that most ideas in the statistics literature has been implemented somewhere as a package that you can download from CRAN. The same cannot be said for PSPP, or even SPSS.

In short, I think that the big payoff for learning statistics this way is *extensibility*. For a book that only covers the very basics of data analysis, this book has a massive overhead in terms of learning R, probability theory and so on. There’s a whole lot of other things that it pushes you to learn besides the specific analyses that the book covers. So if your goal had been to learn how to run an ANOVA in the minimum possible time, well, this book wasn’t a good choice. But as I say, I don’t think that is your goal. *I* think you want to learn how to do data analysis. And if that really is your goal, you want to make sure that the skills you learn in your introductory stats class are naturally and cleanly extensible to the more complicated models that you need in real world data analysis. You want to make sure that you learn to use the same tools that real data analysts use, so that you can learn to do what they do. And so yeah, okay, you’re a beginner right now (or you were when you started this book), but that doesn’t mean you should be given a dumbed-down story, a story in which I don’t tell you about probability density, or a story where I don’t tell you about the nightmare that is factorial ANOVA with unbalanced designs. And it doesn’t mean that you should be given baby toys instead of proper data analysis tools. Beginners aren’t dumb; they just lack knowledge. What you need is *not* to have the complexities of real world data analysis hidden from from you. What you need are the skills and tools that will let you handle those complexities when they inevitably ambush you in the real world.

And what I hope is that this book – or the finished book that this will one day turn into – is able to help you with that.